Aspire Tigon Kit
Aspire Tigon Kit
An all new ‘stick’ style device from Aspire. Introducing the Tigon Kit, an easy to use ‘child safe’ compact device. It comes in four stylish color finishes, Stainless Steel, Blue, the ever-popular Rainbow, and Black. It can be used as an MTL (mouth to lung) or a restricted DTL (direct to lung) vape. It comes with a long-lasting built-in battery and works in ‘By-Pass’ mode. Whichever color you choose, you can be sure of a great performing everyday compact device for purse or pocket. It is the first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.
Specifications & Features:
- Dimensions: 142mm x 24.5mm
- Capacity: 3.5mL
- Coil Resistance: 1.2 ohms (10-12W) & 0.4 ohms (23-28W)
- Output Voltage: 3.3-4.2V
- Continuous Firing Time: 10 Seconds
- Battery Type: built-in (internal)
- Battery Capacity: 2600mAh
- E-Liquid sealing mechanism
- Built-in childproof safety features
- Easy top-fill
- Suitable for both MTL hits and restricted lung hits
- Supreme flavor production
The Tigon Kit comes supplied with a choice of MTL, longer style drip tip, and a slightly wider bore 'stubby' style drip tip more suited for restricted DTL hits.
Aspire has included more flexibility in the Tigon Kit by including two types of push fit coils. A 0.4 ohm DTL style coil designed to run from 23-28 watts and a 1.2 ohm coil designed to run at 10-12 watts more suited to MTL style vaping. Both coils are made from high grade nichrome wire, with great wicking properties for a flavorful vape. The push fit coils help reduce mess when changing and are much easier to remove and replace. The 1.2 ohm coil would be more suited for nic salt type e-liquids but can equally be used with normal e-liquid.
Filling couldn’t be simpler in a child proof/leak proof tank of this type. First pull up on the top cap, then with your thumb or finger on the marker, slide open the top cap to reveal the silicon leak proof seal of the fill port. Closing the tank is the opposite, slide the top cap back into place covering the silicon seal and push down. Remember, when using a new coil, to let the cotton of the coil saturate in the e-liquid for 5 minutes or so before you start to vape. This will ensure that you don’t get dry hits or damage the coil.
INGENIOUS SELF-SEALING COIL HOUSING - The first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed. On the Aspire Tigon Tank, coil replacement is just a case of unscrewing the base hardware, pulling out the old coil and replacing with a new one. Then screwing the base hardware back on again.
***Note that the Tigon Tank can still hold e-liquid when changing the coil, this is because the wicking holes in the tank are covered by a spring loaded sleeve that will slide shut sealing the holes when the coil is removed.
ASPIRE TIGON AIRFLOW - The Tigon Tank has Aspire's new dual function airflow settings. Turning it initially will reveal five smaller holes that can be adjusted from five to four then three, two, one. This is for the MTL type vaping with one small hole being the tightest draw. Rotating the airflow adjustment further will reveal a 'slot' style airflow adjustment. Again this can be adjusted from wide open to almost closed for a restrictive DTL type hit.
CHARGING - Charging is carried out using the supplied USB Cable. Attach the USB cable to the body of the Tigon Kit and connect to a suitable power supply. When charging, the indicator light will indicate the charge status of the device (3.5V or less - red; 3.5-3.8V - blue; above 3.8V - pink) When fulled charged, the light will flash 20 times and switch off. The maximum charge current can reach up to 2A.
- 1 x Tigon Battery
- 1 x Tigon Tank
- 1 x 0.4 Ohm Coil (pre-installed) (23-28W)
- 1 x 1.2 Ohm Coil (extra) (10-12W)
- 1 x Replacement Glass Tube
- 10 x O-Rings
- 1 x Screw Adjustment Tool
- 1 x USB Cable
- 1 x Warranty Card
- 1 x User Manual